JUSTIFICATION OF THE KINEMATIC MODE OF OPERATION OF THE ROTARY WORKING BODY OF THE MACHINE FOR OPENING THE VINEYARD.
Keywords:
rotary, soil trailer, kinematic mode, dump, soil, movement, trajectory, row spacing, cover shaft, working hours, movement, and radius.Abstract
The article describes the functions and role of a machine for opening the cover shaft of vines. It is shown that the value of the kinematic mode of operation (λ) of the rotary working body is one of the main factors determining the active movement of the soil mass from the cover shaft towards the row spacing. It determines the dependence of other factors influencing the change in the value of the kinematic mode of operation and theoretical determinations optimal value for meeting the set agro technical requirements.
References
M. Turakulov and V. Ermatov. Justification scheme installation of a rotary working body for opening grape bushes. 2020 IOP Conf. Ser.: Mater. Sci. Eng. 883 012131.
Gayfulin G Z, Kravchenko R I and Amantaev M A 2018 A prototype model of a tool with an active drive of rotary working bodies Proceedings of the XIV International Scientific and Practical Conference "European Science of the XXI Century" Przhemysl pp6 -43
Kurach A A 2015 Test results of a new rotary tool for surface tillage Proceedings of the international scientific and practical conference "Priority directions for the development of the agro-industrial complex"
Turakulov M A 1992 Development of technology and substantiation of the parameters of the cultivator working bodies for leveling the row spacing of cotton crops
M Turakulov, V A Ermatov, A T Yusufaliyev and B K Batirov Results of laboratory research on the movement of soil with a rotary working body from the area of the shelter roll vineyard. IOP Conf. Series: Earth and Environmental Science 1076 (2022) 012070 .
Bok N B 1965 On the kinematics of tillage cutters pp 44-46 Materials NTS VISKHOM
Dokhin B D 1964 Research and substantiation of optimal parameters and mode of operation of row cutters (Chelyabinsk)
Grinchuk I M and Matyashin Yu I 1969 On the question of choosing the main design parameters and operating modes of the soil cutter Tractors and agricultural machines pp 8- 125
Lukyanov A D 1970 Technological calculation of tillage cutters. // Tractors and agricultural machinery 8 pp 21-22
Kanarev F M 1983 Rotary tillage machines and implements "Engineering" p 140 Moscow
Kanarev F M, Dontsov V B, Tkachenko A I 1969 The study of critical operating regimes of tillage mills Transactions of Kuban Agricultural Institute 29(57) pp 142-148 Krasnodar
Akhmetov A. A. 1986 Substantiation of parameters of the active working body of a universal tool for pre-sowing tillage in the cotton growing zone, Diss. kand. nauk. Yangiyul.- 180-p
Khadanovich V 1989 Justification of the parameters of the non-driven rotary working body for inter-row tillage of cabbage p 17 Chelyabinsk
Gaifulin G Z, Amantayev M A and Kravchenko R I 2018 Improvement of tillage quality by rotary working tools (3i: intellect, idea, innovation, Kostanay)
Vorontsov A T and Saenko V A 1974 Possibilities of using rotary machines for covering vineyards Russian grapes pp 79-123
Aghajanyan Zh A 1984 Technological complex of machines for the cultivation and care of covering and irrigated vineyards (Yerevan) pp 60-141
