INFLUENCE OF MINERAL FILLERS ON THE PHYSICAL AND MECHANICAL PROPERTIES OF COMPOSITE MATERIALS BASED ON POLYETHYLENE AND POLYAMIDE-66

Авторы

  • Panji Tojiev Associate Professor, Doctor of Philosophy in Technical Sciences, (PhD), Termez State University, Republic of Uzbekistan, Termez
  • Hayit Turaev dr. chem. Sciences, Professor, Termez State University. The Republic of Uzbekistan
  • Gayrat Nuraliev Art. teacher, Termez State University, RepublicofUzbekistan, Termez

Ключевые слова:

polyethylene, polyamide-66, mineral fillers, atomic force microscopy, physicochemical and mechanical properties

Аннотация

The article studied the physical and mechanical properties of filled polyethylene and polyamide compositions, the determination of the melt flow index by vizkizometry methods, the determination of bending strength by the methods of two-bearing bending, the determination of Charpy impact strength.

Библиографические ссылки

TojiyevP.J., TuraevH.Kh., Umirova G.A., Nuraliev G.T. Studying the structure and properties of polyethylene filled with dispersed fillers // Universum: technical sciences: electron. scientific magazine 2019. No. 10 (67)

BozorovaN.Kh., Turaev E.R., Dzhalilov A.T. Influence of various metals on the properties of polypropylene // Universum: technical sciences: electron. scientific magazine 2021. No. 1 (82)

GOST 11645-73 (ASTM D 1238). Plastics. Method for determining the fluidity index of a thermoplastic melt. Introduction from 01.01.1975. M.: S.12

GOST 4648-71 (ASTM D 638). Plastics. Test method for static bending. Introduction from 01.01.1973 P. 15

GOST 4647-80 (ASTM D 638). Plastics. Method for determining impact strength according to Charpy. Introductionfrom 06/01/1981, p.27

GOST 11262-80 (ASTM D 638). Plastics. Tensile test method. Introduction from 01.12.1980, p.16

GOST 4651-2014 (ASTM D 638). Plastics. Compression test method. Introduction from 01.03.2015. M.: Standartinform, 2014, p.20

Chukov N. A. Composite materials based on polypropylene and nanosized fillers: dissertation for the candidate of technical sciences: // Nalchik, 2011.- 110 p.: ill. RGBOD, 61 11-5/1845

Henini M., Quantum Dot Nanostructures // Materials Today. - 2002. - V. 48. -P. 140-142.

Kiviranta L., Kumpulainen S. Quality Control and Characterriation of

BentoniteMaterials//PosivaOY. – 2011. – P.102.

Egorova O.V. Directional regulation of the structure and properties of polyethylene filled with dispersed fillers //O.V.Egorova, Yu.A. Kadykova, S.E. Artemenko // Plastic masses. - 2012. - No. 4. - S. 57-59.

Tojiyev P.J., Normurodov B.A., TuraevKh.Kh., Nurkulov F.N. *, Jalilov A.T.* Study of the physical and mechanical properties of highly filled polyethylene compositions // UNIVERSUM: Chemical technology: electronic scientific journal 2018 No. 2 (47).

Mozzhukhin V. B. Influence of technological equipment and technology for obtaining highly filled compositions based on polyolefins on their physical and mechanical properties / V. B. Mozzhukhin et al. // Plastic masses. - 2013. - No. 1. - P. 54–56.

B.A. Normurodov, P.J. Tojiyev, Kh.Kh. Turaev, A.T. Nurkulov

Study of the physical and mechanical properties of basalt-containing polyethylene compositions // Tashkent: Composite materials-2017.-No. 4.-S.10-12

Загрузки

Опубликован

2022-10-24

Как цитировать

Tojiev , P. ., Turaev, H. ., & Nuraliev , G. . (2022). INFLUENCE OF MINERAL FILLERS ON THE PHYSICAL AND MECHANICAL PROPERTIES OF COMPOSITE MATERIALS BASED ON POLYETHYLENE AND POLYAMIDE-66. International Bulletin of Engineering and Technology, 2(10), 109–114. извлечено от https://internationalbulletins.com/intjour/index.php/ibet/article/view/110

Выпуск

Том 2 № 10 (2022): International Bulletin of Engineering and Technology

Раздел

Articles

Лицензия

Лицензия Creative Commons

Это произведение доступно по лицензии Creative Commons «Attribution» («Атрибуция») 4.0 Всемирная.

Наиболее читаемые статьи этого автора (авторов)