TECHNOLOGY OF PAINTING WORKS IN CONSTRUCTION

Authors

  • Ochilova Nurzoda Tursunovna assistant professor of the "Building and Structures Construction" department, Bukhara Institute of Engineering Technology

Keywords:

Surface painting, priming, puttying, sanding works. Paint layer, usually, mechanisms - paint remotes, spray-gun mechanisms, water-based paints, in the preparation of the surface of wood and wooden products.

Abstract

Painting their work perform technology much complicated will be Very much so a lot processes is performed , various paint mixtures and materials are used, various mechanisms, equipment and devices are used. Surfaces to be painted must be dried, cleaned of dust and dirt, smoothed out bumps and cracks on plastered surfaces before applying paint. When preparing the surface of wooden products, wood eyes and hardened resins 3 ммare cut (carved) to the 2nd depth, then these areas are covered with putty and other defects are corrected. Metal pipes , radiators and another while preparing constructions for painting, their surfaces are cleaned of rust and oil stains. Metal surfaces are cleaned with steel brushes, as well as with electric brushes and sandblasting machines.

References

Dry construction and finishing works SH.D.Jumanov..S.Saidrasulov study guide for vocational colleges Tashkent 2009

Technology of finishing works YKUmrzakov, QLMaxsimov Tashkent 2004

Plastering and finishing works Ya Odilkhojayev MI Mirakhmedov Tashkent 2004

Downloads

Published

2022-10-24

How to Cite

Ochilova , N. . (2022). TECHNOLOGY OF PAINTING WORKS IN CONSTRUCTION. International Bulletin of Engineering and Technology, 2(10), 115–121. Retrieved from https://internationalbulletins.com/intjour/index.php/ibet/article/view/112

Most read articles by the same author(s)